The pim WG has created a design team for YANG models for multicast, with focus on protocols related to PIM and IGMP/MLD.
Cisco - Mahesh Sivakumar, Stig Venaas
Huawei - Feng Guo, Yisong Liu
Jabil - Xufeng Liu
Ericsson - Mike McBride, Steve Baillargeon, Hongji Zhao
ZTE - Ran Chen, Fangwei Hu
Juniper - Robert Kebler, Anish Peter
Brocade - Mike Davison
ALU - Andrew Dolganow, Greg Hankins, Tanmoy Kundu
DIRECTV - Jethwani Sunil
Telefonica - Luis Miguel C. Murillo
Universidad Carlos III de Madrid - Carlos J. Bernardos
Concordia University - William Atwood
Ignas Bagdonas
Metaswitch - Pete McAllister
List address: yang-multicast@ietf.org
Archive: http://www.ietf.org/mail-archive/web/yang-multicast/
To subscribe: https://www.ietf.org/mailman/listinfo/yang-multicast
20150422 slides recording
20150506 slides recording
20150520 slides recording
20150715 no slides recording
20150729 slides
20150909 slides
20151202 slides slides-2 recording
20151209 slides
20151216 slides
20160113 slides
20160224 slides
20160302 slides
20160511 slides
20160518 slides
20160601 slides
20160608 slides
These are configs supported by different implementations. Add more configs and implementations as needed. Specify name of vendor and also name of implementation if needed. Do we need to specify IPv4 and IPv6 separately? If you support it specify Yes or the range. Else, just No.
| Config object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| DR Priority | uint32 | uint32 | uint32 | uint32 | uint32 | uint32 | uint32 | uint32 |
| Hello Interval | 1-65535 | 0-3000 | 0-255 | uint16 | uint16 10-1800 | uint 16 1-65535 | uint16 1-18000 | 0-18000 |
| Hello Holdtime | supports multiplier | supports multiplier | uint16 1-65535 | 1-65535 | ||||
| Triggered hello interval | 0-60 | |||||||
| JP Interval | 10-600 | - | - | uint16 | uint 16 10-6000 | uint16 1-18000 | 0-18000 | |
| JP Holdtime | - | - | uint16 1-65535 | 1-65535 | ||||
| Graft retry interval | 100-65535000ms | |||||||
| Propagation Delay | 100 - 32767 ms | 250-2000 milli seconds | - | uint16 | uint 16 100-10000 millisecond | uint16 1-32767ms | 10-32767ms | |
| Override Interval | 400 - 65535 ms | 500-6000 ms | - | uint16 | uint16 100-60000 millisecond | uint16 1-65535ms | 10-65535ms | |
| Assert period | - | 1-300 | ||||||
| Hello Multiplier | 3-20 | 20-100 | ||||||
| BFD enabled IPv4 | boolean | prefer waiting for bfd yang recommendation | boolean | boolean | boolean | boolean | cfgd in BFD process | |
| BFD enabled IPv6 | boolean | boolean | boolean | boolean | boolean | cfgd in BFD process | ||
| JP Policy IPv4 | acl | ACL | ||||||
| JP Policy IPv6 | acl | ACL | ||||||
| JP ASM Policy IPv4 | acl | ACL | ||||||
| JP ASM Policy IPv6 | acl | ACL | ||||||
| JP SSM Policy IPv4 | acl | ACL | ||||||
| JP SSM Policy IPv6 | acl | ACL | ||||||
| Nbr Policy IPv4 | acl | ACL | ||||||
| Nbr Policy IPv6 | acl | ACL | ||||||
| (*,G) state limit | uint32 | |||||||
| (*,G) state warning | uint32 | |||||||
| (S,G) state limit | uint32 | |||||||
| (S,G) state warning | uint32 | |||||||
| Assert Holdtime | uint16 | 0-65535 | ||||||
| Require GenID | boolean | |||||||
| PIM BSR Boundary | in/out/both | boolean | ||||||
| BFD Min TX | uint16 0-1000 | |||||||
| BFD Min RX | uint16 0-1000 | |||||||
| BFD multiplier | uint8 3-50 | |||||||
| PIM Silent | boolean | |||||||
| PIM DR Switch Delay | boolean | |||||||
| PIM DR Switch Delay Interval | uint16 10-3600 | |||||||
| PIM IPsec Name | string | |||||||
| PIM IPsec Type | all/hello | |||||||
| BSM check router alert | < boolean > | |||||||
| Improved assert | < boolean > | |||||||
| Instant prune echo | < boolean > | |||||||
| Multicast sender | [auto | always | never] | |||||||
| Max groups | [1..16000] | |||||||
| Sticky DR | ||||||||
| Three way hello | < boolean > | |||||||
| Tracking support | < boolean > |
BSM check router alert: Whether to enable or disable checking of router alert option in the bootstrap messages received on this interface.
Improved assert: whether to enable or disable improved assert processing on this interface. The PIM Assert process establishes a forwarder for a LAN and requires interaction between the control and forwarding planes. The Assert process is started when data is received on an outgoing interface. This could impact performance if data is continuously received on an outgoing interface. If this flag is set to 'true', the PIM assert process is done entirely on the control-plane with no interaction between the control and forwarding plane.
Instant prune echo : whether PIM will send an instant Prune Echo when the upstream router enters Prune-Pending state on this interface. A Prune Echo is simply a Prune message sent by the upstream router with its own address in the Upstream Neighbor Address field. Due to this, all downstream routers will see the Prune message and they can send a join override if interested in the group.
Multicast sender : specifies the way subnet matching is done for the data packets coming on this interface from the multicast senders.
For all interfaces, the default value is 'auto'. It indicates that the subnet match will happen for packets coming in on this interface. If the subnet does not match, the packet will be dropped.
If the interface is unnumbered or the host is on a different subnet than that of the interface, should be set to 'always'. It means that packets will not go through the regular subnet check and not be dropped on a subnet match. If PIM Hello messages are received on an interface with set to 'always', they are dropped.
For broadcast interfaces, if it is required that there be no multicast senders, should be set to 'never'.
Max groups: the maximum number of groups for which PIM can have downstream state based on received PIM Joins on this interface(doesnt include IGMP joins).
Sticky DR : If sticky-dr is turned on, the priority in PIM hellos sent on this interface when elected as DR will be modified to the value configured in Sticky DR Priority. This is done to avoid the delays in forwarding caused by DR recovery, when switching back to the old DR on a LAN when it comes back up. By enabling sticky-dr on this interface, it will continue to act as the DR for the LAN even after the old DR comes back up.
Three way hello : For all interfaces, the default value is 'disabled'. It specifies that the standard two way hello is supported. When the value is set to 'enabled' it specifies that the three way hello is supported. This ensure the neighbor is created after the three way hello is seen than the conventional two way hello neighbor creation.
Tracking support : if configured then the T bit in the LAN Prune Delay option of the Hello Message is set. This indicates the router's capability to disable Join message suppression.
These are configs supported by different implementations. Add more configs and implementations as needed. Specify name of vendor and also name of implementation if needed. Do we need to specify IPv4 and IPv6 separately? If you support it specify Yes or the range. Else, just No.
| Config object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| RP address | < address > [< acl >] [override] | < address > | < address > < group-prefix >[override] | < address > [] | < address >[acl][preferred] | < group-prefix > [< rp-address >] [override] | ||
| SSM range | [acl] or < default > | < default > and list of group address range | list of group address range | [acl] or < default > | ditto | |||
| spt-threshold-infinity | empty/boolean | empty/boolean | {group-ipv4-prefix | group-ipv6-prefix} [1..4294967294]|infinity | empty/< infinity >[< acl >] | boolean | |||
| register-source | < interface > | < interface> | < interface > | |||||
| old register checksum | empty/boolean | |||||||
| assert holdtime | 5-210 | uint16 | ||||||
| jp holdtime | uint16 | |||||||
| jp interval | uint16 1-18000s | |||||||
| probe interval | uint16 1-3600s | |||||||
| dr priority | uint32 | |||||||
| hello holdtime | uint16 | |||||||
| hello interval | uint16 1-18000s | |||||||
| register suppress interval | uint16 | 0-65535s | ||||||
| register probe time | 0-65535s | |||||||
| state refresh capable | boolean | |||||||
| state refresh interval | 1-255s | |||||||
| embedded rp | boolean | |||||||
| neighbor check recv | boolean | |||||||
| neighbor check send | boolean | |||||||
| register policy | acl | acl | ACL | |||||
| ssm policy | acl | ACL | ||||||
| source policy | acl | acl | ACL | |||||
| source lifetime | uint16 60-65535s | 0-65535s | ||||||
| ipsec name | string | |||||||
| ipsec type | all or hello | |||||||
| SSM default range disable | < ipv4 | ipv6 > | |||||||
| SSM Assert compatible mode | < enable|disable > | |||||||
| ipv4-multicast-disable | < boolean > | |||||||
| ipv6-multicast-disable | < boolean > | |||||||
| non-dr-attract-traffic | < boolean > | |||||||
| rpf-table | [rtable-multicast | rtable-unicast | both] | |||||||
| Multicast fast failover | < boolean > | |||||||
| Multicast ECMP balance | < boolean > | |||||||
| Multicast ECMP hashing | < boolean > | |||||||
| Apply PIM | < all | subsciber-interfaces | non-subsciber-interfaces | none > |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| interface | string | string | string | string | string | int32 | ||
| dr-address | ip-address | ip-address | ip-address | ip-address | ip-address | ip-address | ||
| is-pim-enabled | boolean | boolean | - | presence | ||||
| neighbor-count | uint32 | uint32 | - | uint32 | uint32 | uint32 | ||
| external-neighbor-count | uint16 | - | - | - | ||||
| hello-interval | uint16 | - | (0-255) | uint16 | uint16 | 0-18000 | ||
| trig-hello-ivl | 0-60 | |||||||
| dr-priority | uint32 | - | uint32 | uint32 | uint32 | |||
| hello-expiry | uint32 | - | - | - | ||||
| are-we-dr? | boolean | boolean | - | - | ||||
| bfd-enabled | boolean | - | boolean | boolean | boolean | - (BFD process) | ||
| bfd-interval | uint32 | - | uint16 | - | ||||
| bfd-multiplier | uint32 | - | - | uint8 | - | |||
| passive-interface? | boolean | - | - | boolean | ||||
| join-suppression | - | boolean | ||||||
| join-prune-interval | uint16 | - | uint16 | 0-18000 s | ||||
| graft-retry-ivl | - | 100-65535000 ms | ||||||
| state-refresh-all-capable | - | boolean | ||||||
| prune-delay-enabled? | boolean | - | - | - | ||||
| propagation-delay | uint16 | - | - | uint16 | 10-32767 | |||
| override-interval | uint16 | - | - | uint16 | uint16 | |||
| generation-id | uint32 | - | - | uint32 | uint32 | |||
| hello-holdtime | - | - | - | uint16 | uint16 | |||
| join-prune-holdtime | - | - | - | uint16 | uint16 | |||
| assert-holdtime | - | - | (1..300) | uint16 | uint16 | |||
| join-attribute | - | - | - | boolean | - | |||
| up-down | - | up/down | (up/down) | up/down | up/down/going up/failed | |||
| star-g-state-stored | uint32 | |||||||
| sg-state-stored | uint32 | |||||||
| interface-mode | flag | |||||||
| interface-state | flag | |||||||
| neighbor-count | uint32 | |||||||
| sg-join-count | uint32 | |||||||
| *g-join-count | uint32 |
interface-mode: A flag that indicates the pim modes this interface is enabled to run. (Sparse|Dense|Bidir)
interface-state: A flag that indicates the state of this interface. (DR|Non-DR|DDR|DDR-bdr|p2p)
Neighbor state defined per interface
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| interface | string | string | string | string | string | int32 | ||
| uptime | yang:timeticks | hh:mm:ss | uint32 | hh:mm:ss | uint32 | uint32 | ||
| expires | yang:timeticks | uint32 | uint32 | hh:mm:ss | uint32 | uint32 | ||
| expiry-timer | uint32 | uint32 | - | - | ||||
| is-this-neighbor-dr | boolean | - | - | boolean | - | |||
| propagation-delay | uint16 | - | uint32 | uint16 | - | |||
| override-interval | uint16 | - | uint32 | uint16 | uint16 | |||
| neighbor-address | ip-address | ip-address | ip-address | ip-address | ip-address | ip-address | ||
| neighbor-secondary-address-list | list of ip-address | |||||||
| is-dr-priority-capable | boolean | bool | - | boolean | ||||
| dr-priority | uint32 | uint32 | uint32 | uint32 | uint32 | |||
| is-proxy-capable | boolean | - | - | - | ||||
| gen-id | - | uint32 | uint32 | uint32 | uint32 | uint32 | ||
| join-attribute | - | - | - | boolean | - | |||
| bfd-status | - | - | - | up/down | - | |||
| bfd-config-status | enable/disable | |||||||
| bfd-operational-status | up/down | |||||||
| lan-prune-delay-present | bool | boolean | ||||||
| t-bit | boolean/empty | boolean | ||||||
| bidir-capable | boolean | boolean | ||||||
| state-refresh-capable | - | boolean | ||||||
| sg-join-count | uint32 | |||||||
| *g-join-count | uint32 |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| packets-in | uint32 | - | uint32 | |||||
| packets-out | uint32 | - | uint32 | |||||
| format-error | uint32 | - | uint32 | uint32 | ||||
| checksum-error | uint32 | u32 | uint32 | uint32 | uint32 | |||
| socket-error | uint32 | - | - | uint32 | ||||
| length-error | uint32 | - | uint32 | uint32 | ||||
| unknown-type | uint32 | uint32 | uint32 | uint32 | ||||
| unknown-ver | - | - | uint32 | |||||
| send-queue-full | uint32 | - | - | |||||
| boundary-acl-rx-drop | uint32 | - | uint32 | |||||
| boundary-acl-tx-drop | uint32 | - | uint32 | |||||
| input-hello | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| output-hello | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| input-jp | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| output-jp | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| input-register | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| output-register | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| input-register-stop | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| output-register-stop | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| input-assert | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| output-assert | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| invalid-registers | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| invalid-join-prunes | uint32 | u32 | uint32 | uint32 | uint32 | uint32 | ||
| truncated-packets | uint32 | - (length errror?) | - | |||||
| input-packet-queue-size | uint32 | - | - | uint32 | ||||
| packet-queue-priority | uint32 | - | - | |||||
| enqueued-packets | uint32 | - | - | |||||
| dequeued-packets | uint32 | - | - | |||||
| input-queue-tail-drops | uint32 | - | - | uint32 | ||||
| invalid-register-stop | u32 | uint32 | uint32 | uint32 | ||||
| invalid-hello | u32 | uint32 | uint32 | uint32 | uint32 | |||
| invalid-assert | u32 | uint32 | uint32 | uint32 | uint32 | |||
| recv-probe | - | - | uint32 | |||||
| send-probe | - | - | uint32 | |||||
| invalid-probe | - | - | uint32 | |||||
| recv-crp | u32 | uint32 | uint32 | uint32 | uint32 | |||
| send-crp | u32 | - | uint32 | uint32 | uint32 | |||
| invalid-crp | u32 | - | uint32 | uint32 | uint32 | |||
| recv-bsm | u32 | uint32 | uint32 | uint32 | uint32 | |||
| send-bsm | u32 | uint32 | uint32 | uint32 | uint32 | |||
| invalid-bsm | u32 | uint32 | uint32 | uint32 | ||||
| recv-graft | u32 | - | uint32 | uint32 | ||||
| send-graft | u32 | - | uint32 | uint32 | ||||
| invalid-graft | u32 | - | uint32 | uint32 | ||||
| recv-graft-ack | u32 | - | uint32 | uint32 | ||||
| send-graft-ack | u32 | - | uint32 | uint32 | ||||
| invalid-graft-ack | u32 | - | uint32 | uint32 | ||||
| recv-state-refresh | u32 | - | uint32 | |||||
| send-state-refresh | u32 | - | uint32 | |||||
| invalid-state-refresh | u32 | - | uint32 | |||||
| recv-nbr-unknown | u32 | uint32 | ||||||
| invalid-version | - (unknown-ver) | uint32 | ||||||
| recv-DF-Election | u32 | |||||||
| send-DF-Election | u32 | |||||||
| invalid-DF-Election | u32 | |||||||
| recv-Anycast-Register | u32 | |||||||
| send-Anycast-Register | u32 | |||||||
| invalid-Anycast-Register | u32 | |||||||
| recv-Anycast-Register-Stop | u32 | |||||||
| send-Anycast-Register-Stop | u32 | |||||||
| invalid-Anycast-Register-Stop | u32 | |||||||
| Hello dropped on neighbor policy | u32 | |||||||
| Neighbor unknown | u32 | |||||||
| Bad Receive If | u32 | |||||||
| Rx Register not RP | u32 | |||||||
| Rx Register no route | u32 | |||||||
| Rx Unknown Reg Stop | u32 | |||||||
| Join/Prune? on upstream if | u32 | |||||||
| Join/Prune? for invalid group | u32 | |||||||
| Rx Join/Prune? on upstream if | u32 | |||||||
| Rx Join/Prune? for invalid group | u32 | |||||||
| Rx Join/Prune? messages dropped | u32 | |||||||
| Rx sparse join for dense group | u32 | |||||||
| Rx Graft/Graft? Ack no state | u32 | |||||||
| Rx Graft on upstream if | u32 | |||||||
| Rx CRP not BSR | u32 | |||||||
| Rx BSR when BSR | u32 | |||||||
| Rx BSR not RPF if | u32 | |||||||
| Rx unknown hello opt | u32 | |||||||
| Rx data no state | u32 | |||||||
| Rx RP no state | u32 | |||||||
| Rx malformed packet | u32 | |||||||
| Rx illegal TTL | u32 | |||||||
| Rx illegal destination address | u32 | |||||||
| No RP | u32 | |||||||
| No route upstream | u32 | |||||||
| RP mismatch | u32 | |||||||
| RP mode mismatch | u32 | |||||||
| RPF neighbor unknown | u32 | |||||||
| Rx Joins/Prunes? filtered | u32 | |||||||
| Tx Joins/Prunes? filtered | u32 | |||||||
| Embedded-RP invalid addr | u32 | |||||||
| Embedded-RP limit exceed | u32 | |||||||
| Embedded-RP added | u32 | |||||||
| Embedded-RP removed | u32 | |||||||
| Rx Bidir Join/Prune? on non-Bidir if | u32 | |||||||
| Rx Bidir Join/Prune? on non-DF if | u32 | |||||||
| (*,G)Join drop due to ssm range check | u32 |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| group-address | ip-address | ip-address | ip-address | ip-address | ip-address | |||
| source-address | ip-address | ip-address | ip-address | ip-address | ip-address | |||
| group-prefix-len | uint8 | uint8 (only for bidir) | ||||||
| source-prefix-len | uint8 | - | ||||||
| rp-address | ip-address | ip-address | ip-address | ip-address | ip-address | |||
| rpf-neighbor | ip-address | ip-address | ip-address | |||||
| proxy-address | ip-address | - | ||||||
| protocol | enumeration | ? | enumeration | enumeration | enum | |||
| wildcard | boolean | bool | ||||||
| rpt? | boolean | bool | boolean | boolean | ||||
| spt? | boolean | bool | boolean | boolean | ||||
| uptime | yang:timeticks | uint32 (seconds) | hh:mm:ss | uint32 | uint32 | |||
| expiry | yang:timeticks | uint32 (seconds) | hh:mm:ss | uint32 | ||||
| aliveness-time | uint32 | ? | ||||||
| msdp-source | boolean | - | boolean | boolean | ||||
| rpf-safi | uint8 | - | ||||||
| rpf-table-name | string | - | ||||||
| rpf-drop | boolean | - | ||||||
| rpf-proxy-enabled | boolean | - | ||||||
| jp-status | uint32 | - | ||||||
| is-last-hop? | boolean | - | ||||||
| iif-name | string | string | string | string | int32 | |||
| upstream-state | enum | |||||||
| upstream-protocol | enum | |||||||
| mode | enum | |||||||
| downstream-interface-count | enum | |||||||
| downstream-neighbor-count | enum | |||||||
| upstream-state-flag | flags | |||||||
| accepting-bidir-interface | list of strings |
mode: An enum that indicates the pim mode of this entry. (enum : Sparse, Dense, Bidir)
upstream-state: An enum that indicates the upstream join state for this entry. (enum : no route, no neighbor, no route, admin-scoped, assert winner, looser, etc. . .)
upstream-protocol: An enum that indicates the pim modes this entry is for. (enum : PIM, local-source, MVPN, etc, . . .)
upstream-state-flag: A set flags to indicate the upstream state of the flow. (local-source; local-rp; joint-to-rp; joint-to-source; prune-to-rp; np-prune-to0rp; prune-to-source)
Outgoing interfaces list
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| interface-name | string | string | string | string | int32 | |||
| assert-winner | ip-address | ipaddr | ip-address | |||||
| assert-winner-metric-pref | u32 | int32 | ||||||
| assert-winner-metric | u32 | uint32 | ||||||
| uptime | yang:timeticks | - | uint32 | uint32 | ||||
| expiry | yang:timeticks | u32 | uint32 | uint32 | ||||
| jp-timer | uint32 | - | ||||||
| jp-state | uint32 | - | enum | |||||
| prune-pending-timer | uint32 | |||||||
| forwarding-state | uint32 | - | ||||||
| immediate-state | uint32 | - | ||||||
| last-hop | boolean | - | ||||||
| protocol-type | ? | string | ||||||
| assert-state | - | enumeration | enum | |||||
| assert-timer | - | enumeration | uint32 | |||||
| dr-state | - | boolean | ||||||
| downstream-state | - | enumeration | ||||||
| rpt-state | - | enumeration | ||||||
| local-member | - | boolean | ||||||
| dense-prune-timeout | uint32 | |||||||
| state-flag | flags |
Outgoing interface neighbor list
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| address | ipaddr | |||||||
| state | enum | |||||||
| timeout | u32 | |||||||
| uptime | u32 | |||||||
| last jp oper | enum | |||||||
| last jp time | u32 |
BSR candidate-BSR/election information
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| bsr-address | ip-address | ipaddr | ip-address | ip-address | ip-address | |||
| bsr-priority | uint8 | uint16 | uint8 | uint8 | uint8 | |||
| bsr-local-address | ipaddr | |||||||
| bsr-local-priority | uint16 | |||||||
| bsr-mask-length | uint8 | - | uint8 | uint8 | int8 | |||
| bsr-up-time | uint16 | uint32 | uint32 | |||||
| bsr-election-state | uint32 | enum | enumeration | |||||
| bsr-scope | uint16 | - | enumeration | |||||
| candidate-bsr-address | ip-address | ? | ip-address | ip-address | ||||
| candidate-bsr-state | uint32 | enumeration | boolean | |||||
| candidate-bsr-priority | uint8 | uint8 | uint8 | |||||
| candidate-bsr-mask-len | uint8 | uint8 | int8 | |||||
| bsr-timeout | u32 |
BSR candidate-RP information
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| candidate-rp-address | ip-address | ip-address | ip-address | ip-address | ||||
| candidate-rp-mode | enumeration | boolean (=bidir?) | ||||||
| candidate-rp-scope | uint32 | |||||||
| candidate-rp-priority | uint8 | uint8 | uint8 | |||||
| candidate-rp-holdtime | uint16 | 1-65535 | ||||||
| candidate-rp-advertisement-interval | uint16 | 1-26214 | ||||||
| candidate-rp-advertisement-next | hh:mm:ss | uint32 | ||||||
| candidate-rp-uptime | uint16 | hh:mm:ss | uint32 | |||||
| group-list-acl | string | string | acl | |||||
| crp-mode | enumeration | |||||||
| group-address | ip-address | ip-address | ip-address | |||||
| group-mask-len | uint32 | uint8 | uint8 |
RP information
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| RP-address | ipaddr | ip-addr | ||||||
| discovered-by | enum | enum | ||||||
| PIM-Mode | enum | enum | ||||||
| discovered-from | ipaddr | |||||||
| holdtime | u32 | |||||||
| active-time | string | |||||||
| holdtime-remaining | u32 |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| vrf aware | yes | no | yes | yes | yes (Snooping only) |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| enabled | bool | boolean | bool | |||||
| query-interval | uint (1-3600)s | uint (1-1024) | uint (2-1024)s | uint16(1-18000s) | 1-31744s | |||
| startup query interval | 1-31744s | |||||||
| startup query count | 1-255 | |||||||
| query-response-interval | uint (60-300)s | uint (ms) | uint (1-1023)s | uint8(1-25s) | 0-83876x0.1s | |||
| query-last-member-interval | uint (1-12)s | uint (ms) | uint (1-1023)s | | | uint8(1-5s) | 0-83876x0.1s | ||
| last member query count | 1-255 | |||||||
| robust-count | uint (2-10) | uint (2-10) | uint8(2-10) | uint8(2-5) | 1-255 | |||
| version | uint (1-3) | uint (1-3) | uint (1-3) | 1-3 | ||||
| maximum-transmit-rate | uint (pps) | - | uint16 (kbps) | |||||
| require-router-alert | - | boolean | bool | |||||
| send-router-alert | - | boolean | - (always on) | |||||
| other-querier-present-time | - | uint16(60-300s) | - | |||||
| gmp-entry-limit | - | uint32 | uint32 | |||||
| max-groups | uint (1-75000) | uint32 | ||||||
| max-groups-per-interface | uint (1-40000) | uint32 | ||||||
| explicit-tracking < acl > | empty | - |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| if-name | string | string | string | string | string | int32 | ||
| enabled | bool | boolean | boolean | implicit | ||||
| version | uint (1-3) | uint (1-3) | uint (1-3) | 1-3 | uint8(1-3) | 1-3 | ||
| group-limit | (1-40000) | uint32 | 16000* | 1..100000 | uint16 | uint32 | ||
| max sources | 1000 | - | ||||||
| max group sources | 32000 | uint32 | ||||||
| group-policy | acl | string | string | string | acl | acl | ||
| immediate-leave | toggle | - | toggle | boolean [acl] | bool | |||
| qry before imm leave | bool | |||||||
| ssm-map | policy | group-address-range | policy | policy/group-address & mask | acl | |||
| promiscuous | toggle | - | ||||||
| static | ... | ... | group, addr | group & source addresss | (G,S,I) | |||
| query-interval | `(1..3600)s | 2..1024 | uint16 (s) | uint16(1-18000s) | 1-31744s | |||
| query-response-interval | (1..12)s | 1..1023 | 1..25 (s) | uint8(1-25s) | 0-83876x0.1s | |||
| query-last-member-interval | (60-300) s | 1..1023 | uint16 (ms) | uint8(1-5s) | 0-83876x0.1s | |||
| last member query count | 1-255 | |||||||
| robust-count | - | 2-7 | uint8(2-5) | 1-255 | ||||
| disable-router-alert-check | boolean | - | ||||||
| drop igmpv1 | bool | |||||||
| drop igmpv2/mldv1 | bool | |||||||
| subnet-check | boolean | toggle | - | |||||
| join-group | group-addr | group-addr | ? | |||||
| ip-source-policy | acl | acl | ||||||
| require-router-alert | boolean | bool | ||||||
| send-router-alert | boolean | - | ||||||
| other-querier-present-time | uint16(60-300) | |||||||
| ssmap-enable | boolean | acl | ||||||
| passive interface | bool |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| group | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ||
| source | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ||
| exclude | - | toggle | - | - | ||||
| number of groups | uint | uint | - | uint16 | - | |||
| group increment | ipaddr | ipaddr | - | - | ||||
| number of sources | uint | uint | - | - | ||||
| source increment | ipaddr | ipaddr | - | - | ||||
| static group range start | ipaddr | ipaddr | - | |||||
| static group range end | ipaddr | - | ||||||
| static group range step | ipaddr | ipaddr | - |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| enabled | bool | boolean | bool | |||||
| query-interval | uint (1-3600)s | uint (1-1024) | uint (2-1024)s | uint16(1-18000s) | 1-31744s | |||
| startup query interval | 1-31744s | |||||||
| startup query count | 1-255 | |||||||
| query-response-interval | uint (60-300)s | uint (ms) | uint (1-1023)s | uint8(1-25s) | 0-83876x0.1s | |||
| query-last-member-interval | uint (1-12)s | uint (ms) | uint (1-1023)s | | | uint8(1-5s) | 0-83876x0.1s | ||
| last member query count | 1-255 | |||||||
| robust-count | uint (2-10) | uint (2-10) | uint8(2-10) | uint8(2-5) | 1-255 | |||
| version | uint (1-3) | uint (1-3) | uint (1-3) | 1-3 | ||||
| maximum-transmit-rate | uint (pps) | - | uint16 (kbps) | |||||
| require-router-alert | - | boolean | bool | |||||
| send-router-alert | - | boolean | - (always on) | |||||
| other-querier-present-time | - | uint16(60-300s) | - | |||||
| gmp-entry-limit | - | uint32 | uint32 | |||||
| max-groups | uint (1-75000) | uint32 | ||||||
| max-groups-per-interface | uint (1-40000) | uint32 | ||||||
| explicit-tracking < acl > | empty | - |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| if-name | string | string | string | string | string | int32 | ||
| enabled | bool | boolean | *boolean | boolean | implicit | |||
| version | uint (1-3) | uint (1-3) | uint (1-3) | 1-3 | uint8(1-3) | 1-3 | ||
| group-limit | (1-40000) | uint32 | 16000* | 1..100000 | uint16 | uint32 | ||
| max sources | 1000 | - | ||||||
| max group sources | 32000 | uint32 | ||||||
| group-policy | acl | string | string | string | acl | acl | ||
| immediate-leave | toggle | - | toggle | boolean [acl] | bool | |||
| qry before imm leave | bool | |||||||
| ssm-map | policy | group-address-range | policy | policy/group-address & mask | acl | |||
| promiscuous | toggle | - | ||||||
| static | ... | ... | group, addr | group & source addresss | (G,S,I) | |||
| query-interval | `(1..3600)s | 2..1024 | uint16 (s) | uint16(1-18000s) | 1-31744s | |||
| query-response-interval | (1..12)s | 1..1023 | 1..25 (s) | uint8(1-25s) | 0-83876x0.1s | |||
| query-last-member-interval | (60-300) s | 1..1023 | uint16 (ms) | uint8(1-5s) | 0-83876x0.1s | |||
| last member query count | *1-10 | 1-255 | ||||||
| robust-count | - | 2-7 | uint8(2-5) | 1-255 | ||||
| disable-router-alert-check | boolean | - | ||||||
| drop igmpv1 | bool | |||||||
| drop igmpv2/mldv1 | bool | |||||||
| subnet-check | boolean | *- | - | |||||
| join-group | group-addr | *- | ? | |||||
| ip-source-policy | acl | acl | ||||||
| require-router-alert | boolean | bool | ||||||
| send-router-alert | boolean | - | ||||||
| other-querier-present-time | uint16(60-300) | |||||||
| ssmap-enable | boolean | acl | ||||||
| passive interface | bool |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| group | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ||
| source | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ||
| exclude | - | toggle | - | - | ||||
| number of groups | uint | uint | - | uint16 | - | |||
| group increment | ipaddr | ipaddr | - | - | ||||
| number of sources | uint | uint | - | - | ||||
| source increment | ipaddr | ipaddr | - | - | ||||
| static group range start | ipaddr | ipaddr | - | |||||
| static group range end | ipaddr | - | ||||||
| static group range step | ipaddr | ipaddr | - |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| config-type | enum | |||||||
| sender-site | boolean | |||||||
| c-multicast-signal-mode | enum | |||||||
| c-multicast-frr | boolean | |||||||
| rpt-spt-mode | enum | |||||||
| mvpn-target | ... | |||||||
| mvpn-mtunnel-interface | ... | |||||||
| mvpn-share-mdt | ... | |||||||
| mvpn-switch-mdt | ... | |||||||
| mvpn-ipmsi-tunnel | ... | |||||||
| mvpn-spmsi-tunnel | ... |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| rt-type | enum | |||||||
| vpn-target-value | enum |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| mtunnel-num | uint16 | |||||||
| mtunnel-name | string | |||||||
| is-unnumbered | boolean | |||||||
| unnumbered-if-name | if-name | |||||||
| mtunnel-if-ipv4-address | ipaddr | |||||||
| mtunnel-if-ipv4-masklen | uint8 | |||||||
| mtunnel-if-ipv6-address | ipaddr | |||||||
| mtunnel-if-ipv6-masklen | uint8 |
share mdt --> default mdt
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| share-mdt-mode | enum | |||||||
| ipv4-share-group-address | ipaddr | |||||||
| ipv6-share-group-address | ipaddr |
switch mdt --> data mdt
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| mdt-limit | uint16 | |||||||
| switch-mdt-mode | enum | |||||||
| ipv4-group-pool-address | ipaddr | |||||||
| ipv4-group-pool-masklen | uint8 | |||||||
| ipv6-group-pool-address | ipaddr | |||||||
| ipv6-group-pool-masklen | uint8 | |||||||
| switch-threshold | uint32 | |||||||
| switch-delay-time | uint8 | |||||||
| switch-holddown-time | uint8 | |||||||
| group-acl-name | acl | |||||||
| group-acl-ipv6-name | acl | |||||||
| is-switch-group-reuse-log | boolean |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| tunnel-mode | enum | |||||||
| te-p2mp-template | string |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| ipv4-group-address | ipaddr | |||||||
| ipv4-group-masklen | uint8 | |||||||
| ipv6-group-address | ipaddr | |||||||
| ipv6-group-masklen | uint8 | |||||||
| ipv4-source-address | ipaddr | |||||||
| ipv4-source-masklen | uint8 | |||||||
| ipv6-source-address | ipaddr | |||||||
| ipv6-source-masklen | uint8 | |||||||
| tunnel-mode | enum | |||||||
| te-p2mp-template | string |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| enabled | bool (disable) | boolean | boolean | |||||
| default-peer | ipaddr | - | ipaddr | ipaddr | ||||
| local-address | ipaddr | |||||||
| default-peer-policy | - | - | prefix-list | |||||
| originating-rp | interface | - | ipaddr* | interface | interface | interface | ||
| originating-rp-sa-filter | - | - | acl | |||||
| static-rpf-peer | - | - | ipaddr | |||||
| connect-source | interface | - | ipaddr | ipaddr | ipaddr | |||
| sa-filter-in | (acl,rp-list/acl) | - | acl | |||||
| sa-filter-out | (acl,rp-list/acl) | - | acl | |||||
| ttl-threshold | int | - | int(90-600) | |||||
| rpf-table | - | enum(ucast/mcast/both) | ||||||
| receive-msdp-msg-rate | - | uint32(10..10000) | ||||||
| receive-msdp-msg-interval | - | uint32(0..600) | ||||||
| receive-msdp-msg-threshold | - | uint32(0..1000000) | ||||||
| source | - | ipaddr | ||||||
| active-source-limit | - | uint32 | ||||||
| data-encapsulation | bool | boolean |
** Default peer:** The default peer accepts all MSDP SA messages.
A default peer is needed in topologies where MSDP peers do not coexist with BGP peers. The reverse path forwarding (RPF) check on SA messages can fail, and no SA messages are accepted. In these cases, you can configure the peer as a default peer and bypass RPF checks.
source/active-source-limit : active source limit works with source config where maximum number of source active can be learnt is restricted using limit. 0 is unlimited.
receive-msdp-msg-rate : maximum mumber of MSDP messages that read from the TCP session per receive interval. This value ranges from 0..600 where 0 is default.
receive-msdp-msg-interval : time(seconds) with rate determins total number of packets read from TCP sessions within that configured interval. range 0..1000000.
receive-msdp-msg-threshold :number of packets to be readbefore starting the rate and interval.
*originating-rp(Nokia): Learnt from PIM, MSDP doesn't override
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| peer-count | uint32 | |||||||
| peer-established | uint32 | |||||||
| source-actives | uint32 | |||||||
| last-time-up | uint32 | |||||||
| source-limit-exceeded | uint32 | |||||||
| import-policy-exceeded | uint32 | |||||||
| export-policy-exceeded | uint32 |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| peer-addr | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | ||
| enable | bool (disable) | boolean | enable | |||||
| ttl-threshold | uint8 | - | - | uint8 | uint8 | uint8 | ||
| description | string | - | - | string | string | |||
| mesh-group | string | - | string | string | string | string | ||
| peer-as | as-number | - | - | as-number | ||||
| sa-filter-in | (acl,rp-list/acl) | acl | acl | acl | acl | |||
| sa-filter-out | (acl,rp-list/acl) | acl | acl | acl | acl | |||
| bfd | - | - | boolean | |||||
| hold-time | uint16 | - | uint16 | |||||
| keepalive-time | uint8 (1-60s) | uint16 | - | uint16 | ||||
| connect-retry-time | - | - | uint16 | uint8 | ||||
| keychain | - | string | string | string | ||||
| password | - | enum(chipher/plain text) | string | cipher/simple string | ||||
| sa-cache-maximum | uint32 (1-75000) | - | uint32 | uint32 | ||||
| local-addr | ipaddr | ipaddr |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| msdp peer | ipaddr | - |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| session-state | enum | enum | enumeration | enum | enum | |||
| connect-retry-expire | uint32 | uint32 | uint32 | |||||
| elapsed-time | yangcounter | uint32 | uint32 | uint32 | ||||
| hold-expire | uint32 | uint32 | uint32 | |||||
| is-default-peer | - | boolean | ||||||
| keepalive-expire | uint32 | uint32 | uint32 | uint32 | ||||
| last-receive-time | - | uint32 | ||||||
| last-send-time | - | uint32 | ||||||
| last-reset-reason | - | string | ||||||
| reset-count | uint32 | - | uint32 | uint32 | ||||
| sa-count | uint32 | uint32 | uint32 |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| error-rpf-failure | uint32 | uint32 | uint32 | |||||
| queue-size-in | uint32 | - | uint32 | uint32 | ||||
| queue-size-out | uint32 | - | uint32 | uint32 | ||||
| Peer timeout period | uint32 | uint32 | ||||||
| Peer tel-threshold | uint8 | - | ||||||
| sa-accepted | uint32 | |||||||
| sa-limit-reach | uint32 | |||||||
| active-sa-limit-exceed | uint32 | |||||||
| last-state-change | uint32 | |||||||
| last-msg-from-peer | uint32 | |||||||
| number-of-remote-closes | uint32 | |||||||
| unknown-msg-received | uint32 | |||||||
| error-msg-received | uint32 | |||||||
| sa-learnt | uint32 | |||||||
| rejected-export-policy | uint32 | |||||||
| rejected-import-policy | uint32 | |||||||
| reserved-msg-received | uint32 |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| keepalive | uint (1-60) | uint32 | counter64 | uint32 | ||||
| notification | uint32 | - | counter64 | uint32 | ||||
| sa-message | uint32 | uint32 | counter64 | uint32 | ||||
| sa-response | uint32 | uint32 | counter64 | uint32 | ||||
| sa-reques | uint32 | uint32 | counter64 | uint32 | ||||
| total | uint32 | - | counter64 | |||||
| total-peer | - | counter64 | ||||||
| total-pim | - | counter64 |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| group | ipaddr | ipaddr | ipaddr | ipaddr | ipaddr | |||
| source-addr | ipaddr | ipaddr | ipaddr/* | ipaddr | ipaddr | |||
| up-time | ipaddr | uint32 | uint32 | |||||
| expire | uint32 | uint32 | ||||||
| holddown-interval | uint32 | uint32 | ||||||
| peer-learned-from | string | string | string | string | ||||
| Rpf peer | string | string | ||||||
| sa-rcvd | uint32 | - | ||||||
| pim-interest | flag | - |
| object | Cisco | Juniper | Nokia | Brocade | Ericsson | ZTE | Huawei | Metaswitch |
|---|---|---|---|---|---|---|---|---|
| rp-address | ipaddr | - | ipaddr | ipaddr | ||||
| is-local-rp | - | boolean | ||||||
| sa-adv-expire | - | uint32 |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch | Jabil |
|---|---|---|---|---|---|---|---|---|---|
| enable | |||||||||
| forwarding-mode | |||||||||
| explicit-tracking | |||||||||
| send-query | |||||||||
| fast-leave | |||||||||
| last-member-query-interval | |||||||||
| query-interval | |||||||||
| query-max-response-time | |||||||||
| require-router-alert | |||||||||
| robustness-variable | |||||||||
| version | |||||||||
| querier-source |
| object | Cisco | Juniper | Alcatel-Lucent | Brocade | Ericsson | ZTE | Huawei | Metaswitch | Jabil |
|---|---|---|---|---|---|---|---|---|---|
| enable | |||||||||
| forwarding-mode | |||||||||
| explicit-tracking | |||||||||
| send-query | |||||||||
| fast-leave | |||||||||
| last-member-query-interval | |||||||||
| query-interval | |||||||||
| query-max-response-time | |||||||||
| require-router-alert | |||||||||
| robustness-variable | |||||||||
| version | |||||||||
| querier-source |
The content of this page was last updated on 2017-08-30. It was migrated from the old Trac wiki on 2022-12-20.