This is an implementation report for draft-ietf-idr-rpd
The report created by Huaimo Chen
Implementation 1: | NE40E-M2K V800R011C00 by Router Product Line in Huawei |
Implementation 2: | iMaster NCE IP V100R018C00 by Controller Product Line in Huawei |
These two Implementations are on different code bases.
NLRI | MUST/MAY | Section | Implementation 1 | Implementation 2 |
---|---|---|---|---|
Feature | MUST | 4.1 | Support | Support |
Ordering [1] | MUST | 4.1 | Support | Support |
[1] ordering is by
Error handing | MUST/MAY | Implementation 1 | Implementation 2 | |
---|---|---|---|---|
-NLRI length check | MUST | 4.1 | Support | Support |
-NLRI Policy (1 or 2) | MUST | 4.1 | Support 1 | Support 1 |
Distinguisher checks | MUST | 4.1 | Support | Support |
draft-ietf-idr-rpd options
Type/TLV/Atom/sub-TLV | MUST/MAY | Implementation 1 | Implementation 2 |
---|---|---|---|
BGP Wide Community Type | MUST | Support | Support |
(Target TLV [1]) | MUST | Support | Support |
(Exclude Target TLV [1]) | MUST | Support | Support |
(Parameter TLV [1]) | MUST | Support | Support |
RouteAttr_ Atom | MUST | Support | Support |
MED Change sub-TLV | MUST | Support | Support |
AS-Path Change sub-TLV | MUST | Support | Support |
[1] - BGP Wide Community TLVs (Target, Exclude Target and Parameter TLVs) are not focus of draft-ietf-idr-rpd
The content of this page was last updated on 2022-01-28. It was migrated from the old Trac wiki on 2023-03-17.